RobotDyn TM1637 6 Digit LED Display with 0.56" Digits
RobotDyn TM1637 6 Digit LED Display with 0.56" Digits - AD416 - Green LEDs with Decimal is backordered and will ship as soon as it is back in stock.
Ships Same Day if Ordered Before Noon Pacific Time
This display module is based on the TM1637 display controller chip. The module is available with red, green or blue .056" digits with decimal points.
The module runs from a 5 volt supply and the interface is two wire serial, similar to, but not compatible with I2C. There are several libraries available on the web to drive TM1637 display modules for both Arduino and Raspberry Pi. A link to our favorite Arduino library is in the resources section below.
External 4.7K pull up resistors on the CLK and DIO are required for most applications and are included with the module.
- 1 piece - RobotDyn TM1637 6 Digit LED Display with 0.56" Digits
- 1 piece - Right angle header
- 2 pieces - 4.7K resistor
|Length||90 mm (3.5")|
|Width||26 mm (1.0")|
|Height||11.9 mm (0.47")|
|Digit Height||14.2 mm (0.56")|