Same-day shipping from US stock when ordered before noon Pacific Time Learn more

Free shipping on USA orders of $50 or more! Learn more

Enjoying the new site?

Send us your comments and report any bugs here.

Addicore  |  SKU: AD415-BLUECOLON

RobotDyn TM1637 4 Digit LED Display with 0.56" Digits

Shipping calculated at checkout.

AD415 Options


Ships Same Day if Ordered Before Noon Pacific Time

This display module is based on the TM1637 display controller chip and is available with red, green or blue .056" digits and either decimal points or a colon for clock applications.

The module runs from a 5 volt supply and the interface is two wire serial, similar to, but not compatible with I2C. There are several libraries available on the web to drive TM1637 display modules for both Arduino and Raspberry Pi. A link to our favorite Arduino library is in the resources section below.

External 4.7K pull up resistors on the CLK and DIO are required for most applications and are included with the module.

Product Contents:

  • 1 piece - TM1637 Display Module
  • 1 piece - Right angle header
  • 2 pieces - 4.7K resistor

Length 66.04 mm (2.6")
Width 27.9 mm (1.1")
Height 11.9 mm (0.47")
Digit Height 14.2 mm (0.56")