The D1 Mini is a breadboard-compatible WiFi development board based on the ESP8266.
All of the I/O pins have interrupt, PWM, I2C, and one-wire capability, except for pin D0.
The board comes with three different sets of header pins: long-pin female headers, standard-pin female headers, and male pin headers. You can solder the set you choose to your board. The long-pin female headers are our favorite since they allow you to plug the board into a breadboard while also having female headers available on top of the board.
The board includes an on-board USB Micro connector and USB to serial (UART) converter, making it easy to power and program the board by simply connecting it to your computer with a USB Micro cable.
We offer a board similar to this called the ESP8266 D1 R2 V2.1.0 WiFi Dev Board that is shaped like the common Arduino UNO footprint.
- 1 — D1 Mini ESP8266 Dev Board
- 2 — Long-Pin Female Header 1x8
- 2 — Standard-Pin Female Header 1x8
- 2 — Male Pin Header 1x8
|USB ↔ Serial Converter
|Digital I/O Pins
|11 (see note 1 below)
|Analog Input Pins
|Board Dimensions (not including pins)
|34.2 mm (1.35")
|25.6 mm (1.01")
|7 mm (0.28")
|Weight (including pins)
|8.26 g (0.292 oz)
|I/O, 10k pull-up
|I/O, 10k pull-up, BUILTIN_LED
|I/O, 10k pull-down, SS
You will need to install a driver for your computer to recognize the on-board CH340G USB to serial converter.If you are using Codebender online you do not need to install a driver.
- D1 Mini Board Schematic
Example sketch for fading on-board LED (.zip download)
We flash this onto each board before shipping them to you