RobotDyn TM1637 6 Digit LED Display with 0.56" Digits

Home > Electronics > Displays >

Alternative Views:

Price: $4.99

Availability: Ships same day*
Product Code: AD416

		Select AD416 Options
AD416 Options:

Qty:

Info

This display module is based on the TM1637 display controller chip. The module is available with red, green or blue .056" digits with decimal points.

The module runs from a 5 volt supply and the interface is two wire serial, similar to, but not compatible with I2C. There are several libraries available on the web to drive TM1637 display modules for both Arduino and Raspberry Pi. A link to our favorite Arduino library is in the resources section below.

External 4.7K pull up resistors on the CLK and DIO are required for most applications and are included with the module.

Product Contents:

1 piece - RobotDyn TM1637 6 Digit LED Display with 0.56" Digits
1 piece - Right angle header
2 pieces - 4.7K resistor

Specifications:

VCC	5V DC
Dimensions:
Length	90 mm (3.5")
Width	26 mm (1.0")
Height	11.9 mm (0.47")
Digit Height	14.2 mm (0.56")

Hook Up Diagram

Click on image to view full size

Resources: