Same-day shipping from US stock when ordered before noon Pacific Time Learn more

Free shipping on USA orders of $50 or more! Learn more

Enjoying the new site?

Send us your comments and report any bugs here.

Addicore  |  SKU: AD168

PIR Infrared Motion Sensor - HC-SR501

$1.99
Shipping calculated at checkout.


Delivery

Ships Same Day if Ordered Before Noon Pacific Time

This is a simple motion sensor similar to what is found in motion activate lights and security systems.

Two trimpots (the orange adjustment potentiometers on the side of this module) allow you to adjust the sensitivity and output hold delay (how long it will hold the output high after being triggered). Refer to the product photos above for labels showing which trimpot is which. Turn the sensitivity trimpot clockwise for higher motion sensitivity. Turn the hold delay trimpot clockwise for a longer hold delay). Refer to below diagram labeling the different trimpots and the pinout.

Mount the sensor to your project with our PIR Infrared Motion Sensor Mounting Bracket


Product Contents:


  • 1 — HC-SR501 PIR Infrared Motion Sensor


Specifications:


  • Supply Voltage Range: 5 to 20 V
    • Has on-board 7133 voltage regulator
    • We recommend using supply voltages between 5 and 12 volts to keep from dissipating a lot of heat at the regulator
  • Output signal voltage: 3.3V which is high enough to be read as a high signal on most 5V devices such as Arduinos
  • Output signal is active high, so when movement is detected it outputs a high signal
  • Two trimpots (the orange adjustment potentiometers on the side of this module) allow you to adjust the sensitivity and output hold delay (how long it will hold the output high after being triggered). Refer to the product photos above for labels showing which trimpot is which. Turn the sensitivity trimpot clockwise for higher motion sensitivity. Turn the hold delay trimpot clockwise for a longer hold delay).
  • Sensing Range: ~120 degrees, within 7 meters
  • Minimum Operating Temperature: -15°C
  • Maximum Operating Temperature: 70°C
  • Dimensions: 32.3mm (1.27in) length, 24.7mm (0.97in) width, 25mm (0.98in) height
  • Diameter of Fresnel Lens Base: 23mm (0.91in)
  • Weight: 6g (0.21oz)


Resources: