Same-day shipping from US stock when ordered before noon Pacific Time Learn more

Free shipping on USA orders of $50 or more! Learn more

Enjoying the new site?

Send us your comments and report any bugs here.

Addicore  |  SKU: AD164

Optocoupler JC817 (Photocoupler)

$0.28
Shipping calculated at checkout.


Delivery

Ships Same Day if Ordered Before Noon Pacific Time

An optocoupler (opto-isolator) is useful in isolating two separate circuits while still allowing the input-side circuit to control the output-side circuit.

Optocouplers are often used to allow a microcontroller control motors, servos, LEDs, or other circuits or modules that use a different voltage than the logic level voltage on the microcontroller. Another common use is as an electrical noise barrier to isolate sensitive control circuits such as the I/O pins on a microcontroller from loads or circuits that have or can create electronic noise or spikes such as relay coils and motors.

Product Contents:
  • 1 — Optocoupler JC817 (Photocoupler)
Specifications:
Voltage Isolation 5000 V RMS
Input Forward Current 50 mA
Input Forward Voltage 1.2 ~ 1.4 V
Output Collector Current 50 mA
Output Emitter-Collector Voltage 6 V
Output Collector-Emitter Voltage 70 V
Cut-Off Frequency 80 kHz
Output Power Dissipation 150 mW
Operating Temperature -55°C to +100°C
Package DIP-4
Dimensions (excluding pins)
Length 6.63 mm (0.26")
Width 4.65 mm (0.19")
Height 3.5 mm (0.14")
Weight 0.23 g (0.008 oz)
Pinout
Click on image to view full size JC817 Pinout