Home > Electronics > Power >

Breadboard Power Supply Module
Breadboard Power Supply Module


 
Price: $2.75

Quantity in Stock:34

Availability: Ships same day*
Product Code: AD453
Qty:

Info
 

This is the same Breadboard Power Supply Module included in our Breadboard Prototyping AddiKit. It has been a hit so we decided to offer it as a separate item.

Product Contents:

  • 1 - Breadboard Power Supply Module (style may vary from picture above)
Specifications:

  • Includes two-way independent control and can be switched to 0V, 3.3V, and 5V
  • Barrel Jack Input voltage: 6.5V-12V DC
  • USB Jack:
    • Input voltage: 5V
    • Output voltage: 5V (when module is powered through barrel jack)
  • Output voltage: 3.3V, 5V DC
  • Output current: 700mA
  • Includes two sets of 3.3V, 5V DC output pins that connect to an attached breadboard's power rails
Recommendations For Use:

  • Use a USB wall adapter, such as one used to charge a cell phone, to power the module
  • The 5V output of the module does not have any overcurrent protection between it and the 5V line of the USB jack, therefore we recommend using wall adapters to power the module through the USB connector because most standard USB wall adapters include built-in overcurrent protection
  • The USB jack can be used as a power output when powering the module though the input barrel jack (ex: you can attach an Arduino's USB cable to the USB jack on the power module and use the power module to power the Arduino); the total cumulative current drawn from the USB jack and the breadboard power rails must not exceed 700mA
  • IMPORTANT: it is not recommended to power the module using a computer's USB port. Any overcurrent or short on the 5V line could potentially damage the computer

Recommended Accessories
Transparent Clear Breadboard 400 Tie-Points 4 Power Rails USB Cable - Micro B to USB A Cable - 3ft Breadboard 400 Tie-Points 4 Power Rails USB Cable - USB A to USB A Cable - 1.5ft
Sale Price: $1.87
Price: $1.49
Sale Price: $1.77
Price: $1.49
Transparent Clear Breadboard 400 Tie-Points 4 Power Rails USB Cable - Micro B to USB A Cable - 3ft Breadboard 400 Tie-Points 4 Power Rails USB Cable - USB A to USB A Cable - 1.5ft
Male Barrel Jack fits Arduino board power input (5.5mm O.D 2.1mm I.D) Transparent Clear Breadboard 830 Tie-Points with 4 Sets of Power Rails 5.5mm DC Male Barrel Jack Adapter with Screw Terminals
Price: $0.75
Sale Price: $2.44
Price: $0.72
Male Barrel Jack fits Arduino board power input (5.5mm O.D 2.1mm I.D) Transparent Clear Breadboard 830 Tie-Points with 4 Power Rails 5.5mm DC Male Barrel Jack Adapter with Screw Terminals

Average Rating: 4.5 of 5 Total Reviews: 5 Write a review

  0 of 0 people found the following review helpful:
 
October 1, 2018
By: james mike from cranberry twp, PA United States  


Was this review helpful?

  0 of 0 people found the following review helpful:
 
August 31, 2018
By: Jose Rodriguez from Iowa City, IA United States  


Was this review helpful?

  0 of 0 people found the following review helpful:
 
Works, but... July 7, 2018
By: Ike Kaiser from Brockville, ON Canada  
Wish I could put photos in here.  My modules ALL have voltage reversed.  Installed on the breadboard the voltage is reversed.  Positive is supplied to the blue rail, and Negative to the red rail.  Not a problem if you remember this throughout your build, but easily confused if at any point you fail to pay attention.  Photos would have proven that I tested this carefully, and repeated it with separate modules and with different DMMs.

Was this review helpful?

  0 of 0 people found the following review helpful:
 
Works as expected June 8, 2018
By: Anonymous Person from MO United States  
See Subject

Was this review helpful?

  0 of 0 people found the following review helpful:
 
Handy March 22, 2018
By: Eric KE6US from Riverside, CA United States  
Nice idea to have several input methods (barrel and USB sources)

Was this review helpful?


Browse for more products in the same category as this item:

Electronics > Power
New Products