Home > Electronics > Buttons, Switches, & Knobs >

Blue LED Illuminated Arcade Push Button
Blue Illuminated Arcade Push Button


 
Alternative Views:


Price: $2.95
Sale Price: $2.35
Savings: $0.60

Quantity in Stock:54

Availability: Ships same day*
Product Code: 188
Qty:

Info
 
This blue illuminated arcade button is great for any gaming projects or projects that just look better with an illuminated button. Simply twist the switch mechanism to remove. Unscrew the black plastic mounting nut and remove the black plastic washer then install the plastic button body into a hole of a diameter slightly larger than 0.94" (24mm) and tighten the mounting nut. Then replace the switch mechanism and connect your wires.

Product Contents:

  • 1 piece........Blue illuminated arcade push button
Specifications:
  • Switch contact type is SPST normally open momentary switch
  • Switch action type is momentary switch
  • Internal resistor attached to LED allows you to illuminate the button using 5V to 12V (nominal brightness with 12V)
    • Optimal brightness achieved with 12V
    • Internal resistor can be desoldered and replaced with a different resistor to achieve optimal brightness at lower voltages
  • Bottom shaft diameter: 0.95in (24mm)
  • Top diameter: 1.32in (33.5mm)
Resource Links:
Recommended Products:
White Illuminated Arcade Button Green Illuminated Arcade Button Yellow Illuminated Arcade Button Red Illuminated Arcade Button Quick Disconnect Female Connector

Average Rating: 5 of 5 Total Reviews: 2 Write a review

  0 of 0 people found the following review helpful:
 
Blue LED Illuminated Arcade Push Button January 21, 2018
By: Donald Hall from Windsor, MA United States  
Well built, good quality, and most of all, rugged.

Was this review helpful?

  0 of 0 people found the following review helpful:
 
Fired Up My RetroPie Arcade Using These Buttons. October 9, 2016
By: ovide mercure from boca raton, FL United States  
Very simple to use and look great.  Easy to install and maintain.  It is nice that you can use quick connects or solder directly to the male adapter,   I used them at 5V and they are nice and bright.  Leds can be removed and replaced.  All in all, good value, great product.

Was this review helpful?


Browse for more products in the same category as this item:

Electronics > Buttons, Switches, & Knobs
Electronics
All Products
Electronics > All Electronics
Sale!