Same-day shipping from US stock when ordered before noon Pacific Time Learn more

Free shipping on USA orders of $50 or more! Learn more

Enjoying the new site?

Send us your comments and report any bugs here.

1 2
Addicore  |  SKU: AD130

ESP8266 ESP-01 WiFi Wireless Tranceiver Module 1MB Flash

$3.95
Shipping calculated at checkout.
(26)

Delivery

Ships Same Day if Ordered Before Noon Pacific Time

Description:
  • These modules include 1MB (8Mbit) of flash memory, twice the size of the older blue colored ESP-01 module
  • The ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi network
  • Create your next internet of things (IOT) project with affordable network connectivity by implementing this module into your design
  • The module has the ability to run independent of a host controller
  • The eight pin header includes two GPIO pins that allow for direct connection of the module to sensors, peripherals, or host controller
  • The ESP8266 has 3.6V tolerant I/Os so you will need a logic level converter to connect it with higher voltage devices such as Arduino
  • The ESP8266 requires 3.3V power so you may need a 3.3V voltage regulator to provide the correct voltage, depending on your setup
Product Contents:
  • 1 — ESP8266 ESP-01 WiFi Tranceiver Module with baud rate set at 115200 bps
  • 1 (per order) — Addicore ESP8266 info card (includes pinout diagram)
Specifications:
  • 802.11 b/g/n
  • Serial/UART baud rate: 115200 bps
  • Integrated TCP/IP protocol stack
  • Input power: 3.3V (see "Recommended Accessories" below for 3.3V power options)
  • I/O voltage tolerance: 3.6V Max (see "Recommended Accessories" below for level converters to connect to higher voltage devices (i.e. Arduino) )
  • Regular operation current draw: ~70mA
  • Peak operating current draw: ~300mA
  • Power down leakage current: <10µA
  • +19.5dBm output in 802.11b mode
  • Flash Memory Size: 1MB (8Mbit)
  • WiFi security modes: WPA, WPA2
  • Module's dimensions: 24.75mm x 14.5mm (0.974" x 0.571")
Resources:
Pinout:
Addicore ESP8266 Module Pinout Diagram

Back to top