Same-day shipping from US stock when ordered before noon Pacific Time Learn more

Free shipping on USA orders of $50 or more! Learn more

Enjoying the new site?

Send us your comments and report any bugs here.

Addicore  |  SKU: AD255

4 x 6cm Perfboard Double-Sided and Through-Hole Plated

$1.45
Shipping calculated at checkout.


Delivery

Ships Same Day if Ordered Before Noon Pacific Time

These are high quality FR-4 double sided and through-hole plated prototyping perfboards.

There are 280 total through-holes with standard 2.54mm (0.1") hole spacing. Every hole is fully tinned and through-hole plated so that the same hole is electrically connected on both sides of the board.

The rows and columns are labeled with numbers and letters.

Since the boards are FR-4 material they can be trimmed to size with a good set of shears/snips such as tin snips.

Both sides of the board have 24 total (12 on each end of the board) larger soldering pads along the edge of the board. There are four mounting holes, one in each corner of the board.

Product Contents:
  • 1 piece — 4 x 6cm Perfboard Double-Sided and Through-Hole Plated
Specifications:
  • Plated through-holes
  • Easily trimmed to size with good shears/snips (such as tin snips)
Material FR-4
Through-Holes 280
Hole Spacing 2.54mm (0.1")
Edge Solder Pads 48 (24 on each side of the board)
Edge Solder Pad Spacing 2.54mm (0.1")
Dimensions
Length 60mm (2.362")
Width 40mm (1.575")
Thickness 1.6mm (0.063")
Weight 9.9g (0.35oz)