Same-day shipping from US stock when ordered before noon Pacific Time Learn more

Free shipping on USA orders of $50 or more! Learn more

Enjoying the new site?

Send us your comments and report any bugs here.

Addicore  |  SKU: AD257

2 x 8cm Perfboard Double-Sided and Through-Hole Plated

$0.65
Shipping calculated at checkout.


Delivery

Ships Same Day if Ordered Before Noon Pacific Time

These are high quality FR-4 double sided and through-hole plated prototyping perfboards.

There are 168 total through-holes with standard 2.54mm (0.1") hole spacing. Every hole is fully tinned and through-hole plated so that the same hole is electrically connected on both sides of the board.

The rows and columns are labeled with numbers and letters.

Since the boards are FR-4 material they can be trimmed to size with a good set of shears/snips such as tin snips.

Both sides of the board have 8 total (4 on each end of the board) larger soldering pads along the edge of the board. There are four mounting holes, one in each corner of the board.

Product Contents:
  • 1 piece — 2 x 8cm Perfboard Double-Sided and Through-Hole Plated
Specifications:
  • Plated through-holes
  • Easily trimmed to size with good shears/snips (such as tin snips)
Material FR-4
Through-Holes 168
Hole Spacing 2.54mm (0.1")
Edge Solder Pads 16 (8 on each side of the board)
Edge Solder Pad Spacing 2.54mm (0.1")
Dimensions
Length 80mm (3.15")
Width 20mm (0.79")
Thickness 1.6mm (0.063")
Weight 4.37g (0.154oz)