Same-day shipping from US stock when ordered before noon Pacific Time Learn more

Free shipping on USA orders of $50 or more! Learn more

Enjoying the new site?

Send us your comments and report any bugs here.

Addicore  |  SKU: AD278

RobotDyn nRF24L01+ 2.4GHz Wireless Transceiver

$2.55 $2.80
Shipping calculated at checkout.


Delivery

Ships Same Day if Ordered Before Noon Pacific Time

This is the same nRF24L01+ module that we offer in our RobotDyn 2pcs nRF24L01+ and in our nRF24L01+ Wireless AddiKit. This module is Arduino and Raspberry Pi compatible and there are several tutorials available online, such as tutorials, data sheets, and notes. We have provided some resources below.
Project examples using this module: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation.

Product Contents:

  • 1 - RobotDyn nRF24L01+ module

Specifications:

  • The nRF24L01+ is a 2.4GHz ISM band transceiver.
  • Auto-acknowledge and auto-retransmit.
  • Includes on board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware.
  • Communication range up to 262 feet (80 meters) in ideal conditions.
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
  • The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the nRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ module.
  • The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
  • Ultra low power consumption as low as 11.3mA transmitting, 13.5mA receiving at 2Mbps, 900nA in power down, and 26uA in standby.
  • Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
  • The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.
  • Auto-acknowledge and auto-retransmit
  • Module Dimensions: 29mm (1.142") long x 15.2mm (0.595") wide x 4.6mm (0.181") tall (not including header pins)
  • Weight: 2.2g (0.078oz)



Dimensions:

Addicore nRF24L01+ Module Dimensions Drawing