Click the "VIEW QUANTITY DISCOUNTS" button below the "ADD TO CART" button to view discounts on multiples of this item.
- 2 pieces - 8.8mm x 8.8mm x 5mm (0.35" x 0.35" x 0.20") aluminum heat sinks
- 1 piece - 14mm x 14mm x 6mm (0.55" x 0.55" x 0.24") aluminum heat sink
- 1 piece - Addicore Raspberry Pi heat sink set info card
- Addicore set of 3 heat sinks for the Raspberry Pi B B+ and 2. One large heat sink for the ARM processor and two small heat sinks one for the LAN controller the other for the 3.3V regulator
- These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the electronics they are attached to
- These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases
- These heat sinks can be used with other devices such as the Beaglebone to cool processors, regulators, etc.
- The included Addicore Raspberry Pi heat sink set info card includes information on mounting the heat sinks to your Raspberry Pi
- Information card includes application instructions for both the Raspberry Pi B, Raspberry Pi B+, and Raspberry Pi 2