Home > Electronics > Wireless and RFID > 2.4GHz >

2pcs Addicore nRF24L01+ 2.4GHz Wireless Transceiver Arduino Compatible
2pcs Addicore nRF24L01+ Wireless Transceiver


 

Quantity in Stock:(Out of Stock)

Availability: Retired
Product Code: 112
Retired Product

  
Info
 
Description:
  • Arduino and Raspberry Pi compatible
  • Several tutorials available online, such as tutorials, data sheets, and notes
  • Auto-acknowledge and auto-retransmit
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation
  • Pins are protected in anti-static foam and modules are in resealable packaging with Addicore nRF24L01+ information card

Product Contents:
  • 2 pieces -- nRF24L01+ modules
  • 1 (per order) -- Addicore nRF24L01+ info card (includes pinout diagram)
    • Let us know if you would like more info cards with your order

Specifications:
  • The Addicore nRF24L01+ is a 2.4GHz ISM band transceiver.
  • Includes on board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware.
  • Communication range up to 262 feet (80 meters) in ideal conditions.
  • A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
  • The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the nRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ module.
  • The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
  • Ultra low power consumption as low as 11.3mA transmitting, 13.5mA receiving at 2Mbps, 900nA in power down, and 26uA in standby.
  • Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).
  • The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.
  • Auto-acknowledge and auto-retransmit
  • Module Dimensions: 29mm (1.142") long x 15.2mm (0.595") wide x 4.6mm (0.181") tall (not including header pins)



Dimensions: Addicore nRF24L01+ Module Dimensions Drawing

Recommended Accessories
2pcs nRF24L01+ Breakout Adapter with On-board 3.3V Regulator nRF24L01+ and ESP8266 Breadboard Adapter (BB-ADTR)
Price: $3.90
Price: $0.88
Addicore nRF24L01+ Adapter Board Addicore nRF24L01+(nrf24l01 nrf24) and ESP8266 Breadboard Adapter Breakout (BB-ADTR)

Average Rating: 5 of 5 Total Reviews: 14 Write a review

  0 of 0 people found the following review helpful:
 
Very very helpful and informative October 7, 2016
By: Joey Fortuna from Brooklyn, NY United States  
I'm working on a project which required the NRF24L01 module, but WITHOUT the eight pins. Erin, at Addicore fielded the request and the staff de-soldered  the pin on four units for me. More than that, I lobbed a question (expecting to be referred to Google) at Addicore about power consumption using the NRF component alongside an MRC522 unit (dual-slave SPID). Instead of a rebuff, I got an extremely helpful and informative reply!

Was this review helpful?

  0 of 0 people found the following review helpful:
 
Nice little radios July 15, 2016
By: Andrew J. Cohen from Lombard, IL United States  
Easy to use,
Range is a bit short (using trace antenna, no amplifier)
Was hoping it would reach across my 1300 Sq foot house, but, not quite.

Was this review helpful?

  0 of 0 people found the following review helpful:
 
nRF24L01+ April 8, 2016
By: Edward Larsen from Littleton, CO United States  
These breakouts are well documented and fairly priced.

Was this review helpful?

  0 of 0 people found the following review helpful:
 
Great component made better by Addicore April 2, 2016
By: David Alexis from Redmond, WA United States  
I keep coming back to Addicore for these handy little workhorses. Great price, and quality ensured by the Addicore team.  But when combined with the new Addicore breadboard-friendly breakout board, this product becomes even better!

Was this review helpful?

  0 of 0 people found the following review helpful:
 
Great Product January 31, 2016
By: Andrea Garcia from Winnetka, CA United States  
Honestly, no complaints. Great product and arrived in a short time.

Was this review helpful?

View All Customer Reviews

Browse for more products in the same category as this item:

Electronics > Wireless and RFID > 2.4GHz
Electronics > Wireless and RFID
Electronics > Modules & Shields
Electronics > All Electronics
Electronics
All Products